SEVIC BLUE LASER SBL0304MP4 Instruction Manual download pdf (Page 13)

Power On / Off

·Press the VOL button to turn the unit on. The buttons on the front of the unit light up and “WELCOME”

appears briefly in the LCD panel, followed by the current mode status. If the TFT screen is open, only the

current mode status is displayed.

·You can also turn on the unit by pressing the button ( ) on the remote and open the TFT screen.

·Press and hold the VOL button on the front panel to power off the unit. The monitor is drawn back into

the main compartment and the LCD screen displays “BYE BYE” at the same time.

·You can also turn off the unit by pressing the button ( ) on the remote.

Playing Source Selection

Press the MODE button on the front panel or the SRC button on the remote to change among available

playing sources: TUNER, Disc, AUX IN, iPod, CAMERA (rear view video camera ). The playing mode is

displayed on the TFT or LCD screen.

AUX IN Mode

An external peripheral device can be connected to this unit via RCA output to the “AUX IN”.

CAMERA Mode

“CAMERA” mode is only available if a camera is connected and during reverses driving. To install a rear

view video camera, connect the video input cable to the camera output cable.

Volume Adjustment

To increase or decrease the volume level, turn the VOL button on the front panel or press the VOL+/

VOL- buttons on the remote control. The volume ranges from “0” to “40”. The LCD screen displays the

volume level for 3 seconds.

Default volume memory setup: Rotate VOL knob on the front panel to select volume value and then press

and hold the knob till hear a single sound. If this goes, the setup is complete.

Audio Control Menu

The Audio Control feature allows you to easily adjust your audio system to meet the acoustical

characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. To get

the best possible sound quality from your new system, be sure to adjust the suitable settings for the

speakers as well. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.

Accessing the Audio Control Menu

Press the VOL button on the front panel once or press the SEL on the remote control to display the

“Audio” menu.

Selecting an Audio Feature for Adjustment

·Press the / buttons on the remote to select a item to be adjusted.

·Press the VOL button on the front panel once a item to be selected.

Adjusting an Audio Feature

·Press the / buttons on the remote

·Rotate the VOL button clockwise/anticlockwise to adjust the selected feature to the desired setting.

Operating Instructions

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

No comments

SEVIC BLUE LASER SBL0304MP4 Instruction Manual Page 13