SEVIC BLUE LASER SBL0304MP4 Instruction Manual download pdf (Page 19)

Select FM/AM Band

Touch the BAND button ( ) on the screen, or pre ss the BAND button on the remote control or on the

front panel to change among the following bands: FM-1, FM-2, FM-3, AM-1 and AM-2.

Auto Tuning

Press the button ( ) on the remote control or touch the button on the screen to seek the next

available channel by increasing the tuning frequency. Press the button again to stop searching.

Press the button ( ) on the remote control or touch the button on the screen to seek the next

available channel by decreasing the tuning frequency. Press the button again to stop searching.

Manual Tuning

Press the button ( ) on the remote control or touch the button to increase the tuning frequency one

step at a time.

Press the button ( ) on the remote control or touch the button to decrease the tuning frequency one

step at a time.

Using Preset Stations

6 numbered preset buttons store and recall stations for each band. Front 6 stored stations (1-6) for the

current band appear on the screen , touch the channel directly or press the buttons (1 -6) on the front panel

for use.

You can touch the arrow button ( ) on the screen to select other stations.

Storing a Station

1. Select a band (if needed), then select a station.

2. Touch and hold an onscreen preset button . The preset number appears at the top of the screen.

3. Press and hold the buttons (1 -6) on the front panel to store the current radio station.

Recalling a Station

1. Select a band (if needed).

2. Touch an on-screen preset button (3) to select the corresponding stored station.

3. Press the buttons (1-6) on the front panel to select the corresponding stored station.

Auto Store (AS)

Press the AS/PS button on the panel or touch the button on the screen to automatic scan and store

strong radio stations in the 6 preset channels in the current band.

Program Scan (PS)

1. Press and hold the AS/PS button on the panel to automatic scan radio stations stored in the 6 preset

channels in the current band .

2. Touch the button on the screen to automatic scan radio stations in the current band.

3. Press any button to stop scan while find the desired station.

Seek the PTY (Program Type)

Touch in the screen to enter PTY menu. then touch to select one in the PTY menu, the unit will

auto seek the next available PTY by increasing tuning frequency u ntil the program type matches the PTY,

if no matched was found ,the tuner will return to original radio and “None” is displayed .

AF(Alternative Frequency/Auto Following) Function

Touch in the screen to activate/deactivate AF function. When AF is activated and a radio signal is

too weak, the tuner auto switches to the best alternative frequency.

Note: During auto switching radio frequency, some interference could be heard, turn off AF function can

cease this issue.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Comments to this Manuals

No comments

SEVIC BLUE LASER SBL0304MP4 Instruction Manual Page 19

Comments to this Manuals

Related products and manuals for Car video systems SEVIC BLUE LASER SBL0304MP4